Armstrong / Alar Chain Products

Welded Chains

Committed To Quality

Welded Chain Products

Welded Chains

NO. 80 WELDED STEEL CHAINS

Welded chains for general light-duty applications. Packing: 100 feet per box. 500 feet per reel.

Steel Welded Chains

NO. 80 WELDED STEEL CHAINS
Trade Size Material Diam. Inch Approx. Links Per Foot Weight Per Wt/Hd Ft Pound Maximum Working Load Limit Pounds
80 .080 24 5 75


COIL WELDED CHAINS

Coil welded chains, supplied in either straight or twisted line, which is suitable for many general utility applications. Bright or Zinc finishes available as listed. Packed 100 feet in a carton or on reels as listed.

Coil Welded Chains

COIL WELDED CHAINS
Trade Size No. Material Diam. Inches Wt. Per 100 Ft. in Lbs. Work Load Limit in Lbs. STRAIGHT LINK Inside Link (Inches) TWIST LINK Inside Link (Inches)
Length Width Length Width
4 .120 10 195 1.10 .22 1.09 .19
2 .148 15 295 1.18 .27 1.14 .23
1/0 .177 22 415 1.25 .32 1.22 .29
2/0 .192 27 495 1.27 .35 1.24 .30
4/0 .218 35 635 1.39 .39 1.34 .35


MACHINE WELDED CHAINS

Machine Welded Chains are short welded chains are supplied in either straight or twisted link, especially useful for applications requiring good relative strength and flexibility. Bright or Zinc finishes available. Packed 100 feet in a carton or on reels as listed.

Machine Welded Chains

MACHINE WELDED CHAINS
Trade Size No. Material Diam. Inches Wt. Per 100 Ft. in Lbs. Work Load Limit in Lbs. STRAIGHT LINK Inside Link (Inches) TWIST LINK Inside Link (Inches)
Length Width Length Width
4 .120 11 215 .54 .22 .52 .18
2 .148 19 325 .61 .27 .57 .22
1/0 .177 27 465 .74 .32 .69 .27
2/0 .192 31 545 .79 .35 .73 .29
4/0 .218 42 700 .97 .40 .91 .34 


PASSING LINK WELDED CHAINS

Passing Link Welded chains are made from basic steel, with links that can pass each other freely, which limits the tendency to kink or tangle. Bright or Zinc finish available. Packed 100 ft. to a carton.

Passing Link Welded Chains

PASSING LINK WELDED CHAINS
Trade Size No. Wire Gauge Material Diam. Inside L.k. (Inches) Wt. per 100 Ft. Lbs
Inches Decimal Length Width
2/0 6 3/16 .192 .86 .40 32
4/0 3 7/32 .219 .87 .48 43


PROOF COIL WELDED CHAINS

Proof Coil Welded Chains are made from basic steel. It is a general purpose chain for average lifting, pulling or restraining applications requiring neither a maximum of tensile or impact strength. Zinc, Self Colored or Hot Galvanized finishes. Packed bulk in containers or on reels as listed.

Proof Coil Welded Chains

PROOF COIL WELDED CHAINS
Trade Size Inches Material Diam. Nom. Inside L.k. (Inches) Length 100 Lks In. Wt. per 100 Ft. Lbs. Working Load Limit Lbs.
Inches Decimal Length Width
3/16 7/32 .218 .97 .40 99 41 750
1/4 9/32 .281 1.0 .50 104 71 1250
5/16 11/32 .343 1.1 .50 114 110 1900
3/8 13/32 .406 1.25 .62 128 158 2650
1/2 17/32 .531 1.50 .81 156 272 4500


HI-TEST STEEL WELDED CHAINS

Hi-Test Steel Welded Chains are made from a higher carbon content steel, with a good strength to weight ratio. It possesses a tensile strength far greater than basic steel chain and is highly resistant to abrasive or cutting action and normal wear. Packed bulk in containers as listed.

Hi-Test Steel Welded Chains

HI-TEST STEEL WELDED CHAINS
Trade Size Inches Material Diam. Nom. Inside Lk (Inches) Length 100 Lks In. Wt. Per 100 Ft. Lbs. Working Load Limit Lbs.
Inches Decimal Length Width
1/4 9/32 .281 .83 .39 86 76 2600
5/16 11/32 .343 1.02 .48 105 114 3900
3/8 13/32 .406 1.17 .56 121 158 5400
1/2 17/32 .531 1.46 .75 150 284 9200

Contact Us

Have a question about our products? Looking for a specific product? Fill out the form below and a representative will contact you shortly. For an even faster response time, call us at 847-808-8885.


Welded Chains

Welded chains tend to be a lot stronger than weldless chains type and are commonly used for security, hoisting or lifting, and other heavy duty applications.

  • In the USA, mild steel varieties of welded link chain are available as:
    • Short Link Chains
    • Medium Link Chains
    • Long Link Chains
  • The longer the chain link, the lighter the chain will be per unit length, which is advantageous.
  • However, long link chain does not pass through devices such as pulleys or windlasses as readily as short link chain will.

Contact Us

Have a question about our products? Looking for a specific product? Fill out the form below and a representative will contact you shortly. For an even faster response time, call us at 847-808-8885.


 

Expert advice is just a phone call away

 

Contact Info

Armstrong Alar Chain Corporation
15 E. Palatine Road #108
Prospect Heights, IL 60070

Phone:
Fax:
Email:
 
(847) 808-8885
‍‍(847)‍808-8895
chain@chain-cable.com
Customer Service