Armstrong / Alar Chain Products
Accessories
Committed To Quality
Accessory Products
WIRE ROPE CLIPS
Wire rope clips are available to handle wire rope sizes from 1/16″ to 1-1/8″. Electro galvanized malleable wire rope clips are used in general purpose applications. Drop forged wire rope clips are recommended for extreme loads.
Electro Galvanized Malleable Wire Rope Clips
Electro galvanized malleable wire rope clips are recommended for general applications.
|
Electro Galvanized Malleable |
Rope Size (in) | Torque in lbs. (ft.) |
Weight per 100 (lbs) |
Dimensions (in) | ||
| A | B | C | ||||
| 1/16 | 2 | 3 | 0.38 | 0.65 | 0.15 | |
| 1/8 | 3 | 4 | 0.50 | 0.81 | 0.18 | |
| 3/16 | 4.5 | 6.3 | 0.56 | 0.94 | 0.25 | |
| 1/4 | 15 | 13 | 0.75 | 1.19 | 0.31 | |
| 5/16 | 15 | 15 | 0.75 | 1.31 | 0.31 | |
| 3/8 | 30 | 21 | 0.88 | 1.63 | 0.38 | |
| 7/16 | 40 | 37 | 1.06 | 2.00 | 0.44 | |
| 1/2 | 45 | 37 | 1.06 | 2.00 | 0.44 | |
| 9/16 | 50 | 59 | 1.25 | 2.31 | 0.50 | |
| 5/8 | 75 | 59 | 1.25 | 2.31 | 0.50 | |
| 3/4 | 75 | 84 | 1.31 | 2.56 | 0.56 | |
| 7/8 | 130 | 125 | 1.63 | 3.06 | 0.63 | |
| 1 | 130 | 166 | 1.88 | 3.44 | 0.63 | |
| 1 1/8 | 200 | 243 | 2.00 | 4.00 | 0.75 | |
Hot Dip Galvanized Drop Forged Wire Rope Clips
Hot dip galvanized drop forged wire rope clips are recommended for extremely heavy loads.
|
Galvanized Drop Forged Wire Rope |
Rope Size (in) | Weight per 100 (lbs) |
Dimensions (in) | ||
| A | B | C | |||
| 1/8 | 6 | 0.47 | 0.72 | 0.22 | |
| 3/16 | 10 | 0.59 | 0.97 | 0.25 | |
| 1/4 | 20 | 0.75 | 1.03 | 0.31 | |
| 5/16 | 30 | 0.88 | 1.38 | 0.38 | |
| 3/8 | 47 | 1.00 | 1.50 | 0.44 | |
| 7/16 | 76 | 1.19 | 1.88 | 0.50 | |
| 1/2 | 80 | 1.19 | 1.88 | 0.50 | |
| 9/16 | 104 | 1.31 | 2.25 | 0.56 | |
| 5/8 | 106 | 1.31 | 2.38 | 0.56 | |
| 3/4 | 150 | 1.50 | 2.75 | 0.62 | |
| 7/8 | 212 | 1.75 | 3.12 | 0.75 | |
| 1 | 260 | 1.88 | 3.50 | 0.75 | |
| 1 1/8 | 290 | 2.00 | 3.88 | 0.75 | |
| 1 1/4 | 430 | 2.31 | 4.25 | 0.88 | |
| 1 3/8 | 460 | 2.38 | 4.63 | 0.88 | |
| 1 1/2 | 540 | 2.59 | 4.94 | 0.88 | |
| 1 5/8 | 700 | 2.75 | 5.31 | 1.00 | |
| 1 3/4 | 925 | 3.06 | 5.75 | 1.13 | |
| 2 | 1300 | 3.38 | 6.44 | 1.25 | |
| 2 1/4 | 1600 | 3.88 | 7.13 | 1.25 | |
| 2 1/2 | 1900 | 4.13 | 7.69 | 1.25 | |
Stainless Steel Type 304 Wire Rope Clips
|
Stainless Steel Type 304 |
Weight (lbs) | Dimensions (in) | |||
| A | B | C | D | ||
| 0.03 | 1/16 – 3/32 | 3/32 | 3/4 | 3/8 | |
| 0.05 | 1/8 | 1/8 | 3/4 | 3/8 | |
| 0.06 | 5/32 | 5/32 | 7/8 | 7/16 | |
| 0.09 | 3/16 | 3/16 | 1 | 1/2 | |
| 0.13 | 1/4 | 1/4 | 1 5/32 | 5/8 | |
| 0.16 | 5/16 | 1/4 | 1 1/4 | 3/4 | |
| 0.35 | 3/8 | 3/8 | 1 9/16 | 7/8 | |
| 0.44 | 1/2 | 3/8 | 1 7/8 | 1 | |
| 0.59 | 5/8 | 3/8 | 2 1/8 | 1 1/8 | |
| 0.88 | 3/4 | 7/16 | 2 3/8 | 1 3/16 | |
| 1.1 | 7/8 | 7/16 | 2 1/2 | 1 5/16 | |
Stainless Steel Precision Cast Heavy Duty Wire Rope Clips
|
Stainless Steel Precision Cast |
Weight (lbs) | Dimensions (in) | |||
| A | B | C | D | ||
| 0.02 | 1/16 – 3/32 | 3/32 | 1/2 | 9/16 | |
| 0.03 | 1/8 | 1/8 | 5/8 | 5/8 | |
| 0.04 | 5/32 | 5/32 | 3/4 | 3/4 | |
| 0.06 | 3/16 | 3/16 | 7/8 | 13/16 | |
| 0.1 | 1/4 | 1/4 | 1 1/8 | 7/8 | |
| 0.18 | 5/16 | 5/16 | 1 3/8 | 1 1/8 | |
| 0.35 | 3/8 | 3/8 | 1 3/4 | 1 3/8 | |
| 0.55 | 1/2 | 7/16 | 2 | 1 1/2 | |
| 0.75 | 9/16 | 7/16 | 2 1/16 | 1 3/4 | |
| 0.9 | 5/8 | 1/2 | 2 5/16 | 1 7/8 | |
| 1.05 | 3/4 | 9/16 | 2 1/2 | 2 1/8 | |
| 1.6 | 7/8 | 5/8 | 2 3/4 | 2 3/8 | |
| 1.9 | 1 | 11/16 | 3 | 2 1/2 | |
WIRE ROPE THIMBLES
Armstrong-Alar Chain Corporation offers a variety of thimbles which include heavy-duty wire rope thimbles, standard wire rope thimbles, and AN style thimbles. All are available hot dipped galvanized or stainless steel.
Galvanized Heavy Duty Wire Rope Thimbles
Heavy-duty wire rope thimbles are available in hot dipped galvanized steel and stainless steel, in sizes that handle wire rope diameters from 1/4″ to 2″.
Heavy Duty Wire Rope Thimbles
Hot Dipped Galvanized and Stainless Steel
|
Heavy Duty Wire Rope Thimble |
Rope Diameter (in) | Weight per 100 pcs (lbs) | Dimensions | ||
| A | B | C | |||
| 1/4 | 6.50 | 1.63 | 0.88 | 0.28 | |
| 5/16 | 11.80 | 1.88 | 1.06 | 0.34 | |
| 3/8 | 21.60 | 2.13 | 1.13 | 0.41 | |
| 7/16 | 34.70 | 2.36 | 1.25 | 0.47 | |
| 1/2 | 51.00 | 2.75 | 1.50 | 0.53 | |
| 9/16 | 51.00 | 2.75 | 1.50 | 0.59 | |
| 5/8 | 75.70 | 3.25 | 1.75 | 0.66 | |
| 3/4 | 158.10 | 3.75 | 2.00 | 0.78 | |
| 7/8 | 177.80 | 4.25 | 2.25 | 0.94 | |
| 1 | 313.90 | 4.50 | 2.50 | 1.06 | |
| 1 1/8 – 1 1/4 | 400.00 | 5.13 | 2.88 | 1.31 | |
| 1 1/4 – 1 3/8 | 811.00 | 6.25 | 3.50 | 1.44 | |
| 1 3/8 – 1 1/2 | 1294.80 | 6.50 | 3.50 | 1.56 | |
| 1 5/8 | 1700.00 | 8.00 | 4.00 | 1.72 | |
| 1 3/4 | 1775.00 | 9.00 | 4.50 | 1.84 | |
| 1 7/8 – 2 | 2775.00 | 12.00 | 6.00 | 2.09 | |
Galvanized Standard Wire Rope Thimbles
Standard wire rope thimbles are offered in hot dipped galvanized steel and stainless steel, in sizes that handle wire rope diameters from 1/8″ to 2″. Below are specifications for hot dipped galvanzied steel thimbles.
Standard Wire Rope Thimbles
Hot Dipped Galvanized
|
Standard Galvanized |
Rope Diameter (in) | Weight per 100 pcs (lbs) | Dimensions | ||
| A | B | C | |||
| 1/8 | 3.50 | 1.31 | 0.69 | 0.16 | |
| 3/16 | 3.50 | 1.31 | 0.69 | 0.22 | |
| 1/4 | 3.50 | 1.31 | 0.69 | 0.28 | |
| 5/16 | 4.00 | 1.50 | 0.81 | 0.34 | |
| 3/8 | 6.70 | 1.63 | 0.94 | 0.41 | |
| 1/2 | 12.50 | 1.88 | 1.13 | 0.53 | |
| 5/8 | 34.50 | 2.25 | 1.38 | 0.66 | |
| 3/4 | 47.10 | 2.50 | 1.63 | 0.78 | |
| 7/8 | 84.60 | 3.50 | 1.88 | 0.94 | |
| 1 | 97.50 | 4.25 | 2.50 | 1.06 | |
| 1 1/8 – 1 1/4 | 175.00 | 4.50 | 2.75 | 1.31 | |
| 1 3/8 | 278.52 | 7.54 | 3.54 | 1.42 | |
| 1 1/2 | 313.28 | 8.11 | 4.13 | 1.58 | |
| 1 5/8 | 379.72 | 9.06 | 4.33 | 1.69 | |
| 1 3/4 | 487.96 | 9.59 | 4.33 | 1.81 | |
| 1 7/8 | 512.60 | 10.40 | 4.50 | 2.05 | |
| 2 | 616.00 | 10.63 | 4.50 | 2.09 | |
| 2 1/2 | 880.00 | 11.63 | 5.98 | 2.52 | |
Stainless Steel Standard Wire Rope Thimbles
Standard wire rope thimbles are offered in hot dipped galvanized steel and stainless steel, in sizes that handle wire rope diameters from 1/8″ to 2″. Below are specifications for stainless steel thimbles.
Standard Wire Rope Thimbles
Stainless Steel
|
Standard Stainless Steel |
Item# | Dimensions | Weight | |||
| A | B | C | D | |||
| 234S-02 | 3/32 | 5/16 | 5/8 | 0.03 | 0.01 | |
| 234S-03 | 1/8 | 11/32 | 3/4 | 0.04 | 0.01 | |
| 234S-04 | 5/32 | 1/2 | 7/8 | 0.04 | 0.01 | |
| 234S-05 | 3/16 | 1/2 | 7/8 | 0.04 | 0.02 | |
| 234S-06 | 1/4 | 11/16 | 1 1/16 | 0.05 | 0.03 | |
| 234S-08 | 5/16 | 7/8 | 1 3/8 | 0.06 | 0.04 | |
| 234S-10 | 3/8 | 1 | 1 5/8 | 0.06 | 0.06 | |
| 234S-13 | 1/2 | 1 1/4 | 1 7/8 | 0.07 | 0.09 | |
| 234S-14 | 9/16 | 1 3/8 | 2 1/4 | 0.07 | 0.12 | |
| 234S-16 | 5/8 | 1 7/16 | 2 3/8 | 0.08 | 0.18 | |
| 234S-18 | 11/16 | 1 1/2 | 2 3/4 | 0.08 | 0.26 | |
| 234S-20 | 3/4 | 1 3/4 | 3 | 0.10 | 0.31 | |
| 234S-22 | 7/8 | 1 5/8 | 3 1/4 | 0.10 | 0.38 | |
| 234S-25 | 1 | 2 | 3 | 0.10 | 0.46 | |
AN Thimbles
AN style wire rope thimbles are available in zinc plated steel and stainless steel, in sizes that handle cable diameters from 3/64″ to 3/8″.
AN Thimbles
AN Style Thimble |
To Fit Cable Diameter (in) |
Cold Rolled Steel Zinc Plated Part No. |
Stainless Steel Part No. |
Dimensions | |||||
| A | B | C | D | E | F | ||||
| 3/64, 1/16, 5/64, 3/32 | AN 100-3* | AN 100-C3* | .350 | 43/64 | 3/16 | 3/32 | 0.32 | 5/64 | |
| 3/32, 7/64, 1/8 | AN 100-4* | AN 100-C4* | .350 | 45/64 | 7/32 | 9/64 | 032 | 5/64 | |
| 5/32 | AN 100-5* | AN 100-C5* | .400 | 51/64 | 7/32 | 11/64 | 0.32 | 7/64 | |
| 3/16 | AN 100-6* | AN 100-C6* | .500 | 1 | 5/16 | 13/64 | 0.32 | 11/64 | |
| 7/32, 1/4 | AN 100-8* | AN 100-C8* | .700 | 1 13/32 | 13/32 | 17/64 | 0.32 | 11/64 | |
| 9/32, 5/16 | AN 100-10* | AN 100-C10* | .900 | 1 51/64 | 7/16 | 2/64 | 0.40 | 7/32 | |
| 3/8 | AN 100-12* | AN 100-C12* | 1.00 | 2 | 5/8 | 25/64 | 0.40 | 17/64 | |
Chain Accessories
HOOK & EYE TURNBUCKLES
HOOK & HOOK TURNBUCKLES
Hook & eye turnbuckles and hook & hook turnbuckles are available in thread diameters and take-ups from 1/4″x 4″ to 1 1/2″x24″, with working load limits (WLL) from 400 to 7,500 pounds.
|
Hook & Eye Turnbuckles, Hook & Hook Turnbuckles |
Thread Dia. & Take Up |
WLL (lbs) | Dimensions (in) | Weight (lbs.) | ||
| A | B | C | ||||
| 1/4 x 4 | 400 | 0.45 | 4.00 | 0.34 | 0.30 | |
| 5/16 x 4 1/2 | 700 | 0.50 | 4.50 | 0.44 | 0.47 | |
| 3/8 x 6 | 1000 | 0.58 | 6.00 | 0.53 | 0.75 | |
| 1/2 x 6 | 1500 | 0.66 | 6.00 | 0.72 | 1.60 | |
| 1/2 x 9 | 1500 | 0.66 | 9.00 | 0.72 | 1.83 | |
| 1/2 x 12 | 1500 | 0.66 | 12.00 | 0.72 | 2.08 | |
| 5/8 x 6 | 2250 | 0.84 | 6.00 | 0.88 | 2.75 | |
| 5/8 x 9 | 2250 | 0.84 | 9.00 | 0.88 | 3.13 | |
| 5/8 x 12 | 2250 | 0.84 | 12.00 | 0.88 | 3.50 | |
| 3/4 x 6 | 3000 | 0.98 | 6.00 | 1.00 | 3.89 | |
| 3/4 x 9 | 3000 | 0.98 | 9.00 | 1.00 | 4.61 | |
| 3/4 x 12 | 3000 | 0.98 | 12.00 | 1.00 | 5.43 | |
| 3/4 x 18 | 3000 | 0.98 | 18.00 | 1.00 | 7.25 | |
| 7/8 x 12 | 4000 | 1.13 | 12.00 | 1.25 | 8.10 | |
| 7/8 x 18 | 4000 | 1.13 | 18.00 | 1.25 | 9.95 | |
| 1 x 6 | 5000 | 1.25 | 6.00 | 1.44 | 9.33 | |
| 1 x 12 | 5000 | 1.25 | 12.00 | 1.44 | 11.93 | |
| 1 x 18 | 5000 | 1.25 | 18.00 | 1.44 | 14.00 | |
| 1 x 24 | 5000 | 1.25 | 24.00 | 1.44 | 17.25 | |
| 1 1/4 x 12 | 6500 | 1.50 | 12.00 | 1.81 | 19.00 | |
| 1 1/4 x 18 | 6500 | 1.50 | 18.00 | 1.81 | 23.00 | |
| 1 1/4 x 24 | 6500 | 1.50 | 24.00 | 1.81 | 27.00 | |
| 1 1/2 x 12 | 7500 | 1.88 | 12.00 | 2.12 | 27.50 | |
| 1 1/2 x 18 | 7500 | 1.88 | 18.00 | 2.12 | 31.00 | |
| 1 1/2 x 24 | 7500 | 1.88 | 24.00 | 2.12 | 37.50 | |
EYE & EYE TURNBUCKLES
JAW & EYE TURNBUCKLES
JAW & JAW TURNBUCKLES
Eye & eye turnbuckles, jaw & eye turnbuckles, and jaw & jaw turnbuckles are available in thread diameters and take-ups from 1/4″x4″ to 2 3/4″x 24″, with working load limits (WLL) from 500 to 75,000 pounds. The ultimate load limit of these turnbuckles is five times the WLL.
|
Eye & Eye Turnbuckle, Jaw & Eye Turnbuckle, Jaw & Jaw Turnbuckles |
Thread Dia. & Take Up |
WLL (lbs) | Dimensions (in) | Weight (lbs.) | |||||
| A | B | C | D | Eye/Eye | Jaw/Eye | Jaw/Jaw | |||
| 1/4 x 4 | 500 | 0.45 | 0.62 | 0.78 | 0.34 | 0.30 | 0.32 | 0.39 | |
| 5/16 x 4 1/2 | 800 | 0.50 | 0.87 | 0.94 | 0.44 | 0.46 | 0.47 | 0.54 | |
| 3/8 x 6 | 1200 | 0.54 | 0.87 | 1.12 | 0.53 | 0.73 | 0.76 | 0.83 | |
| 1/2 x 6 | 2200 | 0.63 | 1.06 | 1.44 | 0.72 | 1.48 | 1.53 | 1.57 | |
| 1/2 x 9 | 2200 | 0.55 | 1.06 | 1.44 | 0.72 | 1.71 | 1.76 | 1.95 | |
| 1/2 x 12 | 2200 | 0.55 | 1.06 | 1.44 | 0.72 | 2.19 | 2.20 | 2.24 | |
| 5/8 x 6 | 3500 | 0.82 | 1.31 | 1.75 | 0.88 | 2.47 | 2.65 | 2.80 | |
| 5/8 x 9 | 3500 | 0.82 | 1.31 | 1.75 | 0.88 | 2.90 | 3.06 | 3.35 | |
| 5/8 x 12 | 3500 | 0.82 | 1.31 | 1.75 | 0.88 | 3.48 | 3.78 | 4.00 | |
| 3/4 x 6 | 5200 | 1.03 | 1.50 | 2.09 | 1.00 | 3.90 | 4.00 | 4.30 | |
| 3/4 x 9 | 5200 | 1.03 | 1.50 | 2.09 | 1.00 | 4.60 | 4.75 | 4.89 | |
| 3/4 x 12 | 5200 | 1.03 | 1.50 | 2.09 | 1.00 | 5.46 | 5.76 | 5.90 | |
| 3/4 x 18 | 5200 | 1.03 | 1.50 | 2.09 | 1.00 | 6.97 | 7.00 | 7.52 | |
| 7/8 x 6 | 7200 | 1.23 | 1.75 | 2.38 | 1.25 | 5.85 | 6.29 | 6.84 | |
| 7/8 x 12 | 7200 | 1.23 | 1.75 | 2.38 | 1.25 | 7.65 | 8.00 | 8.60 | |
| 7/8 x 18 | 7200 | 1.23 | 1.75 | 2.38 | 1.25 | 10.25 | 10.80 | 11.44 | |
| 1 x 6 | 10000 | 1.31 | 2.06 | 3.00 | 1.44 | 8.98 | 9.16 | 9.44 | |
| 1 x 12 | 10000 | 1.31 | 2.06 | 3.00 | 1.44 | 11.31 | 11.40 | 11.53 | |
| 1 x 18 | 10000 | 1.31 | 2.06 | 3.00 | 1.44 | 14.00 | 14.75 | 16.10 | |
| 1 x 24 | 10000 | 1.31 | 2.06 | 3.00 | 1.44 | 16.02 | 17.50 | 18.60 | |
| 1 1/4 x 6 | 15200 | 1.86 | 2.81 | 3.56 | 1.81 | 15.45 | 16.00 | 16.69 | |
| 1 1/4 x 12 | 15200 | 1.86 | 2.81 | 3.56 | 1.81 | 19.00 | 20.00 | 23.00 | |
| 1 1/4 x 18 | 15200 | 1.86 | 2.81 | 3.56 | 1.81 | 22.50 | 24.18 | 26.60 | |
| 1 1/4 x 24 | 15200 | 1.86 | 2.81 | 3.56 | 1.81 | 25.00 | 28.50 | 31.20 | |
| 1 1/2 x 12 | 21400 | 2.25 | 2.81 | 4.06 | 2.12 | 27.00 | 31.10 | 35.50 | |
| 1 1/2 x 18 | 21400 | 2.25 | 2.81 | 4.06 | 2.12 | 31.69 | 35.00 | 40.70 | |
| 1 1/2 x 24 | 21400 | 2.25 | 2.81 | 4.06 | 2.12 | 38.20 | 44.20 | 47.60 | |
| 1 3/4 x 18 | 28000 | 2.60 | 3.38 | 4.06 | 2.38 | 45.20 | 48.80 | 52.40 | |
| 1 3/4 x 24 | 28000 | 2.60 | 3.38 | 4.06 | 2.38 | 58.00 | 60.00 | 64.00 | |
| 2 x 24 | 37000 | 2.62 | 3.69 | 5.75 | 2.69 | 81.57 | 102.00 | 115.00 | |
| 2 1/2 x 24 | 60000 | 3.06 | 4.44 | 6.50 | 3.12 | 180.00 | 183.00 | 200.00 | |
| 2 3/4 x 24 | 75000 | 3.68 | 4.19 | 7.00 | 3.25 | 210.00 | 214.00 | 248.00 | |
ANCHOR SHACKLES
Hot dip galvanized drop forged anchor shackles in both round pin anchor shackle and screw pin anchor shackle configurations. Hot dip galvanized drop forged anchor shackles are available in sizes from 3/16″ to 2 1/2″, with working load limits ranging from 1/3 to 55 tons.
Hot Dip Galvanized Drop Forged Anchor Shackles
|
Hot dip galvanized drop forged |
Nominal Size (mm) |
Weight Load Limit (tons) |
Dimensions (in) | Weight (lbs.) Screw Pin Type |
Weight (lbs) Round Pin Type |
||
| A | B | C | |||||
| 3/16 | 1/3 | 0.68 | 0.25 | 0.88 | 0.06 | 0.06 | |
| 1/4 | 1/2 | 0.47 | 0.31 | 1.13 | 0.10 | 0.13 | |
| 5/16 | 3/4 | 0.53 | 0.38 | 1.22 | 0.19 | 0.18 | |
| 3/8 | 1 | 0.66 | 0.44 | 1.44 | 0.31 | 0.29 | |
| 7/16 | 1 1/2 | 0.75 | 0.50 | 1.69 | 0.38 | 038 | |
| 1/2 | 2 | 0.81 | 0.63 | 1.88 | 0.72 | 0.71 | |
| 5/8 | 3 1/4 | 1.06 | 0.75 | 2.38 | 1.37 | 1.50 | |
| 3/4 | 4 3/4 | 1.25 | 0.88 | 2.81 | 2.35 | 2.32 | |
| 7/8 | 6 1/2 | 1.44 | 1.00 | 3.31 | 3.62 | 3.49 | |
| 1 | 8 1/2 | 1.69 | 1.13 | 3.75 | 5.03 | 5.00 | |
| 1 1/8 | 9 1/2 | 1.81 | 1.25 | 4.25 | 7.41 | 6.97 | |
| 1 1/4 | 12 | 2.03 | 1.38 | 4.69 | 9.05 | 9.75 | |
| 1 3/8 | 13 1/2 | 2.25 | 1.50 | 5.25 | 13.53 | 13.25 | |
| 1 1/2 | 17 | 2.38 | 1.63 | 5.75 | 17.20 | 17.25 | |
| 1 3/4 | 25 | 2.88 | 2.00 | 7.00 | 27.78 | 29.46 | |
| 2 | 35 | 3.25 | 2.25 | 7.75 | 45.00 | 45.75 | |
| 2 1/2 | 55 | 4.13 | 2.75 | 10.50 | 85.75 | 87.12 | |
BOLT-TYPE SHACKLES
Hot dip galvanized drop forged bolt-type shackles, in both safety chain shackle and safety anchor shackle configurations. These shackles are available in sizes from 1/2″ to 3″, with working load limits ranging from 2 to 85 tons.
Hot Dip Galvanized Drop Forged Bolt-Type Shackles
|
Hot dip galvanized drop forged |
Nominal Size (mm) |
Weight Load Limit (tons) |
Dimensions (in) | Weight (lbs.) Screw Pin Type |
Weight (lbs) Round Pin Type |
||
| A | B | C | |||||
| 1/2 | 2 | 0.81 | 0.63 | 1.61 | 0.79 | 0.75 | |
| 5/8 | 3 1/4 | 1.06 | 0.75 | 2.00 | 1.68 | 1.47 | |
| 3/4 | 4 3/4 | 1.25 | 0.86 | 2.38 | 2.72 | 2.52 | |
| 7/8 | 6 1/2 | 1.44 | 1.00 | 2.81 | 3.95 | 3.85 | |
| 1 | 8 1/2 | 1.69 | 1.13 | 3.19 | 5.66 | 5.55 | |
| 1 1/8 | 9 1/2 | 1.81 | 1.25 | 3.58 | 8.27 | 7.60 | |
| 1 1/4 | 12 | 2.03 | 1.38 | 3.94 | 11.71 | 10.81 | |
| 1 3/8 | 13 1/2 | 2.25 | 1.50 | 4.38 | 15.83 | 13.75 | |
| 1 1/2 | 17 | 2.38 | 1.63 | 4.81 | 20.80 | 18.50 | |
| 1 3/4 | 25 | 2.88 | 2.00 | 5.75 | 33.91 | 31.40 | |
| 2 | 35 | 3.25 | 2.25 | 6.75 | 52.25 | 46.75 | |
| 2 1/2 | 55 | 4.13 | 2.75 | 8.00 | 98.25 | 85.00 | |
| 3 | 85 | 5.00 | 3.25 | 8.50 | 154.00 | 124.25 | |
T316 STAINLESS STEEL SHACKLES
Stainless Steel T316 Precision Cast Load Rated Shackles
|
Dimensions meet Fed. Spec: RR-C-271D, Type IV A, Class 2 |
Item | Dimensions (in) | WLL (lb) |
Weight (lbs) | |||
| A | B | C | D | ||||
| 2711S-05 | 3/16″ | 1/4″ | 3/8″ | 7/8″9 | 650 | 0.04 | |
| 2711S-06 | 1/4″ | 5/16″ | 15/32″ | 1 1/16″ | 880 | 0.10 | |
| 2711S-08 | 5/16″ | 3/8″ | 1/2″ | 1 1/4″ | 1300 | 0.18 | |
| 2711S-10 | 3/8″ | 7/16″ | 5/8″ | 1 7/16″ | 1500 | 0.28 | |
| 2711S-12 | 7/16″ | 1/2″ | 3/4″ | 1 5/8″ | 2000 | 0.42 | |
| 2711S-13 | 1/2″ | 5/8″ | 7/8″ | 1 7/8″ | 3000 | 0.68 | |
| 2711S-16 | 5/8″ | 3/4″ | 1 1/16″ | 2 5/16″ | 4000 | 1.26 | |
| 2711S-20 | 3/4″ | 7/8″ | 1 3/16″ | 2 7/8″ | 6000 | 2.10 | |
| 2711S-22 | 7/8″ | 1″ | 1 1/2″ | 3 7/16″ | 8000 | 3.30 | |
| 2711S-25 | 1″ | 1 1/8″ | 1 5/8″ | 3 3/4″ | 10000 | 4.60 | |
| 2711S-32 | 1 1/4″ | 1 3/8″ | 2 1/8″ | 4 5/8″ | 14000 | 10.00 | |
Our Accessories
We carry a full line of aluminum and copper sleeves with tools for crimping. Armstrong-Alar also offers cable assemblies.
Contact Us
Our Accessories
We carry a full line of aluminum and copper sleeves with tools for crimping. Armstrong-Alar also offers cable assemblies.
Contact Us
Expert advice is just a phone call away
